Product Description
Blacksmith Motoring's Phantom chrome 26 inch TRUE BOLT ON TOTAL front wheel conversion for Yamaha Roadliner and Stratoliner. ABSOLUTLY NO NEED TO CUT THE NECK OF YOUR MOTORCYCLE FRAME!!!!!!!!!
Blacksmith Motoring is proud to present the first and only TRUE BOLT ON 26inch front wheel conversion for the all year Yamaha Star Roadliner and Stratoliner. This kit was engineered with the correct track and trail for above highway speed riding, cornering, cruising comfort, and OEM load carrying. This kit is a completed front end swap and does not use any of the OEM front end components. However we did make sure you factory ignition, headlight bucket, headlight nacelle/key cover, and the OEM quick detachable fairing mounts(STR-2C503-40-00) are a simple bolt on. The headlight is at 90 degrees so turn it down a few notches in the adjustment screw and your lighting up the road. The purchaser is responsible for selecting correct tire size, tube, wheel, hub, axle size and fender. Blacksmith Motoring assumes no responsibility in your selection. Total install to riding time 4hrs. Wanna sell you bike but keep your 26 inch front end for your new roadliner or stratoliner, simple swap back to stock if you need to trade it in. This is a basic Builder kit.
Bolt on features:
- Factory headlight bolt on lower triple tree with correct placement for headlight ignition switch cover to function properly.
- Ignition switch position in stock location direct bolt in (Customer needs to remove ignition switch from OEM upper triple tree).
- OEM quick release Fairing mounts (STR-2C503-40-00) are direct bolt on to triple trees
Kit Includes:
- UPPER AND LOWER TRIPLE TREE SET MACHINE FINISH
- UPPER FORK TUBE COVERS MACHINE FINISH
- LOWER TUBE COVERS CHROME
- LOWER FORK TUBE WITH HIDDDEN AXLE COVERS MACHINE FINISH
IBBMA Master Builder Designer H. Gio Giovanni has tested this setup for 4 years in all environment to insure a close to stock ride, performance enhanced handling, above highway speed riding characteristic. This is the only wheel size of choice he will ride on our Retroliner series. See him running it to the max here:http://youtu.be/CbIkHP2JFeA and OEM vs Phantom 26 here:http://youtu.be/uuxRY0wu2QA cruising the Turbo 26 R here: http://youtu.be/11byriZ3nnM ***PLEASE NOTE VEHICLE IN PICTURE ARE SHOWN AS CUSTOM BUILDS AND PAINT AND POWDERCOATING FINISHES DO NOT REFLECT DESCRIPTION. This is a basic Builder kit. You the Customer are responsible for selecting the proper wheel size, hubs, wheel spacers, axle size and fender and fender spacers,brake caliber...Blacksmith Motoring assumes NO responsibility in your selections of additional parts needed to complete the installation nor the quality of ride performance..*****Please Note******This is a custom product and may take 4-12 weeks for delivery.Please see our return policy in the FAQ section of the store.***Custom Product***
